The Basics of C++

[-Infectious]

To whom is this tutorial directed?

Spoiler (Click to View)

This tutorial is for those people who want to learn programming in C++ and do not necessarily have any previous knowledge of other programming languages. Of course any knowledge of other programming languages or any general computer skill can be useful to better understand this tutorial, although it is not essential.

It is also suitable for those who need a little update on the new features the language has acquired from the latest standards.

If you are familiar with the C language, you can take the first three parts of this tutorial as a review of concepts, since they mainly explain the C part of C++. There are slight differences in the C++ syntax for some C features, so I still recommend you to read them.

The 4th part describes object-oriented programming.

The 5th part mostly describes the new features introduced by ANSI-C++ standard.

Structure of this tutorial

Spoiler (Click to View)

The tutorial is divided in six main parts, and each part is divided into several sections covering one specific topic each. You can access any section directly from the section index available on the left side bar, or begin the tutorial from any point and follow the links at the bottom of each section.

Many sections include examples that describe the use of the newly acquired knowledge in the chapter. It is recommended to read these examples and to be able to understand each of the code lines that constitute it before passing to the next chapter.

A good way to gain experience with a programming language is by modifying and adding new functionalities on your own to the example programs that you fully understand. Don't be scared to modify the examples provided with this tutorial, that's the way to learn!

Compatibility Notes
The ANSI-C++ standard acceptation as an international standard is relatively recent. It was first published in November 1997, and revised in 2003. Nevertheless, the C++ language exists from a long time before (1980s). Therefore there are many compilers which do not support all the new capabilities included in ANSI-C++, especially those released prior to the publication of the standard.

This tutorial is thought to be followed with modern compilers that support -at least on some degree- ANSI-C++ specifications. I encourage you to get one if yours is not adapted. There are many options, both commercial and free.

Compilers
The examples included in this tutorial are all console programs. That means they use text to communicate with the user and to show their results.

All C++ compilers support the compilation of console programs. Check the user's manual of your compiler for more info on how to compile them.

Probably the best way to start learning a programming language is by writing a program. Therefore, here is our first program:

Code:

// my first program in C++

#include <iostream>
using namespace std;

int main ()
{
  cout << "Hello World!";
  return 0;
}

Result: Hello World!

The first panel (in light blue) shows the source code for our first program. The second one (in light gray) shows the result of the program once compiled and executed. To the left, the grey numbers represent the line numbers - these are not part of the program, and are shown here merely for informational purposes.

The way to edit and compile a program depends on the compiler you are using. Depending on whether it has a Development Interface or not and on its version. Consult the compilers section and the manual or help included with your compiler if you have doubts on how to compile a C++ console program.

The previous program is the typical program that programmer apprentices write for the first time, and its result is the printing on screen of the "Hello World!" sentence. It is one of the simplest programs that can be written in C++, but it already contains the fundamental components that every C++ program has. We are going to look line by line at the code we have just written:

// my first program in C++
This is a comment line. All lines beginning with two slash signs (//) are considered comments and do not have any effect on the behavior of the program. The programmer can use them to include short explanations or observations within the source code itself. In this case, the line is a brief description of what our program is.
#include <iostream>
Lines beginning with a hash sign (#) are directives for the preprocessor. They are not regular code lines with expressions but indications for the compiler's preprocessor. In this case the directive #include <iostream> tells the preprocessor to include the iostream standard file. This specific file (iostream) includes the declarations of the basic standard input-output library in C++, and it is included because its functionality is going to be used later in the program.
using namespace std;
All the elements of the standard C++ library are declared within what is called a namespace, the namespace with the name std. So in order to access its functionality we declare with this expression that we will be using these entities. This line is very frequent in C++ programs that use the standard library, and in fact it will be included in most of the source codes included in these tutorials.
int main ()
This line corresponds to the beginning of the definition of the main function. The main function is the point by where all C++ programs start their execution, independently of its location within the source code. It does not matter whether there are other functions with other names defined before or after it - the instructions contained within this function's definition will always be the first ones to be executed in any C++ program. For that same reason, it is essential that all C++ programs have a main function.

The word main is followed in the code by a pair of parentheses (()). That is because it is a function declaration: In C++, what differentiates a function declaration from other types of expressions are these parentheses that follow its name. Optionally, these parentheses may enclose a list of parameters within them.

Right after these parentheses we can find the body of the main function enclosed in braces ({}). What is contained within these braces is what the function does when it is executed.
cout << "Hello World!";
This line is a C++ statement. A statement is a simple or compound expression that can actually produce some effect. In fact, this statement performs the only action that generates a visible effect in our first program.

cout is the name of the standard output stream in C++, and the meaning of the entire statement is to insert a sequence of characters (in this case the Hello World sequence of characters) into the standard output stream (cout, which usually corresponds to the screen).

cout is declared in the iostream standard file within the std namespace, so that's why we needed to include that specific file and to declare that we were going to use this specific namespace earlier in our code.

Notice that the statement ends with a semicolon character (;). This character is used to mark the end of the statement and in fact it must be included at the end of all expression statements in all C++ programs (one of the most common syntax errors is indeed to forget to include some semicolon after a statement).
return 0;
The return statement causes the main function to finish. return may be followed by a return code (in our example is followed by the return code with a value of zero). A return code of 0 for the main function is generally interpreted as the program worked as expected without any errors during its execution. This is the most usual way to end a C++ console program.

You may have noticed that not all the lines of this program perform actions when the code is executed. There were lines containing only comments (those beginning by //). There were lines with directives for the compiler's preprocessor (those beginning by #). Then there were lines that began the declaration of a function (in this case, the main function) and, finally lines with statements (like the insertion into cout), which were all included within the block delimited by the braces ({}) of the main function.

The program has been structured in different lines in order to be more readable, but in C++, we do not have strict rules on how to separate instructions in different lines. For example, instead of

Code:

int main ()
{
  cout << " Hello World!";
  return 0;
}

We could have written:

Code:

int main () { cout << "Hello World!"; return 0; }

All in just one line and this would have had exactly the same meaning as the previous code.

In C++, the separation between statements is specified with an ending semicolon (;) at the end of each one, so the separation in different code lines does not matter at all for this purpose. We can write many statements per line or write a single statement that takes many code lines. The division of code in different lines serves only to make it more legible and schematic for the humans that may read it.

Let us add an additional instruction to our first program:

Code:

// my second program in C++

#include <iostream>

using namespace std;

int main ()
{
  cout << "Hello World! ";
  cout << "I'm a C++ program";
  return 0;
}

Result: Hello World! I'm a C++ program

In this case, we performed two insertions into cout in two different statements. Once again, the separation in different lines of code has been done just to give greater readability to the program, since main could have been perfectly valid defined this way:

Code:

int main () { cout << " Hello World! "; cout << " I'm a C++ program "; return 0; }

We were also free to divide the code into more lines if we considered it more convenient:

Code:

int main ()
{
  cout <<
    "Hello World!";
  cout
    << "I'm a C++ program";
  return 0;
}

And the result would again have been exactly the same as in the previous examples.

Preprocessor directives (those that begin by #) are out of this general rule since they are not statements. They are lines read and processed by the preprocessor and do not produce any code by themselves. Preprocessor directives must be specified in their own line and do not have to end with a semicolon (;).

Comments

Spoiler (Click to View)

Comments are parts of the source code disregarded by the compiler. They simply do nothing. Their purpose is only to allow the programmer to insert notes or descriptions embedded within the source code.

C++ supports two ways to insert comments:

Code:

// line comment
/* block comment */

The first of them, known as line comment, discards everything from where the pair of slash signs (//) is found up to the end of that same line. The second one, known as block comment, discards everything between the /* characters and the first appearance of the */ characters, with the possibility of including more than one line.
We are going to add comments to our second program:

Code:

/* my second program in C++
   with more comments */

#include <iostream>
using namespace std;

int main ()
{
  cout << "Hello World! ";     // prints Hello World!
  cout << "I'm a C++ program"; // prints I'm a C++ program
  return 0;
}

Result: Hello World! I'm a C++ program


If you include comments within the source code of your programs without using the comment characters combinations //, /* or */, the compiler will take them as if they were C++ expressions, most likely causing one or several error messages when you compile it.

Variables. Data Types.

Spoiler (Click to View)

The usefulness of the "Hello World" programs shown in the previous section is quite questionable. We had to write several lines of code, compile them, and then execute the resulting program just to obtain a simple sentence written on the screen as result. It certainly would have been much faster to type the output sentence by ourselves. However, programming is not limited only to printing simple texts on the screen. In order to go a little further on and to become able to write programs that perform useful tasks that really save us work we need to introduce the concept of variable.

Let us think that I ask you to retain the number 5 in your mental memory, and then I ask you to memorize also the number 2 at the same time. You have just stored two different values in your memory. Now, if I ask you to add 1 to the first number I said, you should be retaining the numbers 6 (that is 5+1) and 2 in your memory. Values that we could now for example subtract and obtain 4 as result.

The whole process that you have just done with your mental memory is a simile of what a computer can do with two variables. The same process can be expressed in C++ with the following instruction set:

Code:

a = 5;
b = 2;
a = a + 1;
result = a - b;

Obviously, this is a very simple example since we have only used two small integer values, but consider that your computer can store millions of numbers like these at the same time and conduct sophisticated mathematical operations with them.

Therefore, we can define a variable as a portion of memory to store a determined value.

Each variable needs an identifier that distinguishes it from the others. For example, in the previous code the variable identifiers were a, b and result, but we could have called the variables any names we wanted to invent, as long as they were valid identifiers.

Identifiers

Spoiler (Click to View)

A valid identifier is a sequence of one or more letters, digits or underscore characters (_). Neither spaces nor punctuation marks or symbols can be part of an identifier. Only letters, digits and single underscore characters are valid. In addition, variable identifiers always have to begin with a letter. They can also begin with an underline character (_ ), but in some cases these may be reserved for compiler specific keywords or external identifiers, as well as identifiers containing two successive underscore characters anywhere. In no case can they begin with a digit.

Another rule that you have to consider when inventing your own identifiers is that they cannot match any keyword of the C++ language nor your compiler's specific ones, which are reserved keywords. The standard reserved keywords are:

asm, auto, bool, break, case, catch, char, class, const, const_cast, continue, default, delete, do, double, dynamic_cast, else, enum, explicit, export, extern, false, float, for, friend, goto, if, inline, int, long, mutable, namespace, new, operator, private, protected, public, register, reinterpret_cast, return, short, signed, sizeof, static, static_cast, struct, switch, template, this, throw, true, try, typedef, typeid, typename, union, unsigned, using, virtual, void, volatile, wchar_t, while

Additionally, alternative representations for some operators cannot be used as identifiers since they are reserved words under some circumstances:

and, and_eq, bitand, bitor, compl, not, not_eq, or, or_eq, xor, xor_eq

Your compiler may also include some additional specific reserved keywords.

Very important

Spoiler (Click to View)

The C++ language is a "case sensitive" language. That means that an identifier written in capital letters is not equivalent to another one with the same name but written in small letters. Thus, for example, the RESULT variable is not the same as the result variable or the Result variable. These are three different variable identifiers.

Fundamental data types

Spoiler (Click to View)

When programming, we store the variables in our computer's memory, but the computer has to know what kind of data we want to store in them, since it is not going to occupy the same amount of memory to store a simple number than to store a single letter or a large number, and they are not going to be interpreted the same way.

The memory in our computers is organized in bytes. A byte is the minimum amount of memory that we can manage in C++. A byte can store a relatively small amount of data: one single character or a small integer (generally an integer between 0 and 255). In addition, the computer can manipulate more complex data types that come from grouping several bytes, such as long numbers or non-integer numbers.

Next you have a summary of the basic fundamental data types in C++, as well as the range of values that can be represented with each one:

Name: char
Description: Character or small integer.
Size* 1byte
Range* signed: -128 to 127 unsigned: 0 to 255

Name: short int (short)
Description: short integer
Size* 2bytes
Range* signed: -32768 to 32767 unsigned: 0 to 65535

Name: int
Description: Integer.
Size* 4bytes
Range* signed: -2147483648 to 2147483647 unsigned: 0 to 4294967295

Name: long int (long)
Description: long integer
Size* 4bytes
Range* signed: -2147483648 to 2147483647 unsigned: 0 to 4294967295

Name: bool
Description: Boolean value. It can take one of two values: true or false.
Size* 1byte
Range* true or false

Name: float
Description: Floating point number.
Size* 4bytes
Range* +/- 3.4e +/- 38 (~7 digits)

Name: double
Description: Double precision floating point number.
Size* 8bytes
Range* +/- 1.7e +/- 308 (~15 digits)

Name: long double
Description: Long double precision floating point number.
Size* 8bytes
Range* +/- 1.7e +/- 308 (~15 digits)

Name: wchar_t
Description: Wide character.
Size* 2 or 4 bytes
Range* 1 wide character

* The values of the columns Size and Range depend on the system the program is compiled for. The values shown above are those found on most 32-bit systems. But for other systems, the general specification is that int has the natural size suggested by the system architecture (one "word") and the four integer types char, short, int and long must each one be at least as large as the one preceding it, with char being always one byte in size. The same applies to the floating point types float, double and long double, where each one must provide at least as much precision as the preceding one.

Declaration of variables

Spoiler (Click to View)

In order to use a variable in C++, we must first declare it specifying which data type we want it to be. The syntax to declare a new variable is to write the specifier of the desired data type (like int, bool, float...) followed by a valid variable identifier. For example:

Code:

int a;
float mynumber;

These are two valid declarations of variables. The first one declares a variable of type int with the identifier a. The second one declares a variable of type float with the identifier mynumber. Once declared, the variables a and mynumber can be used within the rest of their scope in the program.

If you are going to declare more than one variable of the same type, you can declare all of them in a single statement by separating their identifiers with commas. For example:

Code:

int a, b, c;

This declares three variables (a, b and c), all of them of type int, and has exactly the same meaning as:

Code:

int a;
int b;
int c;

The integer data types char, short, long and int can be either signed or unsigned depending on the range of numbers needed to be represented. Signed types can represent both positive and negative values, whereas unsigned types can only represent positive values (and zero). This can be specified by using either the specifier signed or the specifier unsigned before the type name. For example:

Code:

unsigned short int NumberOfSisters;
signed int MyAccountBalance;

By default, if we do not specify either signed or unsigned most compiler settings will assume the type to be signed, therefore instead of the second declaration above we could have written:

Code:

int MyAccountBalance;

with exactly the same meaning (with or without the keyword signed)

An exception to this general rule is the char type, which exists by itself and is considered a different fundamental data type from signed char and unsigned char, thought to store characters. You should use either signed or unsigned if you intend to store numerical values in a char-sized variable.

short and long can be used alone as type specifiers. In this case, they refer to their respective integer fundamental types: short is equivalent to short int and long is equivalent to long int. The following two variable declarations are equivalent:

Code:

short Year;
short int Year;

Finally, signed and unsigned may also be used as standalone type specifiers, meaning the same as signed int and unsigned int respectively. The following two declarations are equivalent:

Code:

unsigned NextYear;
unsigned int NextYear;

To see what variable declarations look like in action within a program, we are going to see the C++ code of the example about your mental memory proposed at the beginning of this section:

Code:

// operating with variables

#include <iostream>
using namespace std;

int main ()
{
  // declaring variables:
  int a, b;
  int result;

  // process:
  a = 5;
  b = 2;
  a = a + 1;
  result = a - b;

  // print out the result:
  cout << result;

  // terminate the program:
  return 0;
}

Result: 4


Do not worry if something else than the variable declarations themselves looks a bit strange to you. You will see the rest in detail in coming sections.

Scope of variables

Spoiler (Click to View)

All the variables that we intend to use in a program must have been declared with its type specifier in an earlier point in the code, like we did in the previous code at the beginning of the body of the function main when we declared that a, b, and result were of type int.

A variable can be either of global or local scope. A global variable is a variable declared in the main body of the source code, outside all functions, while a local variable is one declared within the body of a function or a block.


Global variables can be referred from anywhere in the code, even inside functions, whenever it is after its declaration.

The scope of local variables is limited to the block enclosed in braces ({}) where they are declared. For example, if they are declared at the beginning of the body of a function (like in function main) their scope is between its declaration point and the end of that function. In the example above, this means that if another function existed in addition to main, the local variables declared in main could not be accessed from the other function and vice versa.

Initialization of variables
When declaring a regular local variable, its value is by default undetermined. But you may want a variable to store a concrete value at the same moment that it is declared. In order to do that, you can initialize the variable. There are two ways to do this in C++:

The first one, known as c-like initialization, is done by appending an equal sign followed by the value to which the variable will be initialized:

type identifier = initial_value ;
For example, if we want to declare an int variable called a initialized with a value of 0 at the moment in which it is declared, we could write:

Code:

int a = 0;

The other way to initialize variables, known as constructor initialization, is done by enclosing the initial value between parentheses (()):

type identifier (initial_value) ;
For example:

Code:

int a (0);

Both ways of initializing variables are valid and equivalent in C++.

Code:

// initialization of variables

#include <iostream>
using namespace std;

int main ()
{
  int a=5;               // initial value = 5
  int b(2);              // initial value = 2
  int result;            // initial value undetermined

  a = a + 3;
  result = a - b;
  cout << result;

  return 0;
}

Result: 6

Introduction to strings

Spoiler (Click to View)

Variables that can store non-numerical values that are longer than one single character are known as strings.

The C++ language library provides support for strings through the standard string class. This is not a fundamental type, but it behaves in a similar way as fundamental types do in its most basic usage.

A first difference with fundamental data types is that in order to declare and use objects (variables) of this type we need to include an additional header file in our source code: <string> and have access to the std namespace (which we already had in all our previous programs thanks to the using namespace statement).

Code:

// my first string
#include <iostream>
#include <string>
using namespace std;

int main ()
{
  string mystring = "This is a string";
  cout << mystring;
  return 0;
}

Result: This is a string

As you may see in the previous example, strings can be initialized with any valid string literal just like numerical type variables can be initialized to any valid numerical literal. Both initialization formats are valid with strings:

Code:

string mystring = "This is a string";
string mystring ("This is a string");

Strings can also perform all the other basic operations that fundamental data types can, like being declared without an initial value and being assigned values during execution:

Code:

// my first string
#include <iostream>
#include <string>
using namespace std;

int main ()
{
  string mystring;
  mystring = "This is the initial string content";
  cout << mystring << endl;
  mystring = "This is a different string content";
  cout << mystring << endl;
  return 0;
}

Result: This is the initial string content
This is a different string content

Constants

Spoiler (Click to View)

Constants are expressions with a fixed value.

Literals

Spoiler (Click to View)

Literals are the most obvious kind of constants. They are used to express particular values within the source code of a program. We have already used these previously to give concrete values to variables or to express messages we wanted our programs to print out, for example, when we wrote:

Code:

a = 5;

the 5 in this piece of code was a literal constant.

Literal constants can be divided in Integer Numerals, Floating-Point Numerals, Characters, Strings and Boolean Values.

Integer Numerals

Code:

1776
707
-273

They are numerical constants that identify integer decimal values. Notice that to express a numerical constant we do not have to write quotes (") nor any special character. There is no doubt that it is a constant: whenever we write 1776 in a program, we will be referring to the value 1776.

In addition to decimal numbers (those that all of us are used to using every day), C++ allows the use of octal numbers (base 8) and hexadecimal numbers (base 16) as literal constants. If we want to express an octal number we have to precede it with a 0 (a zero character). And in order to express a hexadecimal number we have to precede it with the characters 0x (zero, x). For example, the following literal constants are all equivalent to each other:

Code:

75         // decimal
0113       // octal
0x4b       // hexadecimal

All of these represent the same number: 75 (seventy-five) expressed as a base-10 numeral, octal numeral and hexadecimal numeral, respectively.

Literal constants, like variables, are considered to have a specific data type. By default, integer literals are of type int. However, we can force them to either be unsigned by appending the u character to it, or long by appending l:

Code:

75         // int
75u        // unsigned int
75l        // long
75ul       // unsigned long

In both cases, the suffix can be specified using either upper or lowercase letters.

Floating Point Numbers

Spoiler (Click to View)

They express numbers with decimals and/or exponents. They can include either a decimal point, an e character (that expresses "by ten at the Xth height", where X is an integer value that follows the e character), or both a decimal point and an e character:

Code:

3.14159    // 3.14159
6.02e23    // 6.02 x 10^23
1.6e-19    // 1.6 x 10^-19
3.0        // 3.0

These are four valid numbers with decimals expressed in C++. The first number is PI, the second one is the number of Avogadro, the third is the electric charge of an electron (an extremely small number) -all of them approximated- and the last one is the number three expressed as a floating-point numeric literal.

The default type for floating point literals is double. If you explicitly want to express a float or a long double numerical literal, you can use the f or l suffixes respectively:

Code:

3.14159L   // long double
6.02e23f   // float

Any of the letters that can be part of a floating-point numerical constant (e, f, l) can be written using either lower or uppercase letters without any difference in their meanings.

Character and string literals

Spoiler (Click to View)

There also exist non-numerical constants, like:

Code:

'z'
'p'
"Hello world"
"How do you do?"

The first two expressions represent single character constants, and the following two represent string literals composed of several characters. Notice that to represent a single character we enclose it between single quotes (') and to express a string (which generally consists of more than one character) we enclose it between double quotes (").

When writing both single character and string literals, it is necessary to put the quotation marks surrounding them to distinguish them from possible variable identifiers or reserved keywords. Notice the difference between these two expressions:

Code:

x
'x'

x alone would refer to a variable whose identifier is x, whereas 'x' (enclosed within single quotation marks) would refer to the character constant 'x'.

Character and string literals have certain peculiarities, like the escape codes. These are special characters that are difficult or impossible to express otherwise in the source code of a program, like newline (\n) or tab (\t). All of them are preceded by a backslash (\). Here you have a list of some of such escape codes:


\n newline
\r carriage return
\t tab
\v vertical tab
\b backspace
\f form feed (page feed)
\a alert (beep)
\' single quote (')
\" double quote (")
\? question mark (?)
\\ backslash (\)


For example:

Code:

'\n'
'\t'
"Left \t Right"
"one\ntwo\nthree"

Additionally, you can express any character by its numerical ASCII code by writing a backslash character (\) followed by the ASCII code expressed as an octal (base-8) or hexadecimal (base-16) number. In the first case (octal) the digits must immediately follow the backslash (for example \23 or \40), in the second case (hexadecimal), an x character must be written before the digits themselves (for example \x20 or \x4A).

String literals can extend to more than a single line of code by putting a backslash sign (\) at the end of each unfinished line.

Code:

"string expressed in \
two lines"

You can also concatenate several string constants separating them by one or several blank spaces, tabulators, newline or any other valid blank character:


"this forms" "a single" "string" "of characters"


Finally, if we want the string literal to be explicitly made of wide characters (wchar_t type), instead of narrow characters (char type), we can precede the constant with the L prefix:


L"This is a wide character string"


Wide characters are used mainly to represent non-English or exotic character sets.

Boolean literals

Spoiler (Click to View)

There are only two valid Boolean values: true and false. These can be expressed in C++ as values of type bool by using the Boolean literals true and false.

Defined constants (#define)

Spoiler (Click to View)

You can define your own names for constants that you use very often without having to resort to memory-consuming variables, simply by using the #define preprocessor directive. Its format is:

#define identifier value
For example:

Code:

#define PI 3.14159
#define NEWLINE '\n'

This defines two new constants: PI and NEWLINE. Once they are defined, you can use them in the rest of the code as if they were any other regular constant, for example:

Code:

// defined constants: calculate circumference

#include <iostream>
using namespace std;

#define PI 3.14159
#define NEWLINE '\n'

int main ()
{
  double r=5.0;               // radius
  double circle;

  circle = 2 * PI * r;
  cout << circle;
  cout << NEWLINE;

  return 0;
}

Result: 31.4159


In fact the only thing that the compiler preprocessor does when it encounters #define directives is to literally replace any occurrence of their identifier (in the previous example, these were PI and NEWLINE) by the code to which they have been defined (3.14159 and '\n' respectively).

The #define directive is not a C++ statement but a directive for the preprocessor; therefore it assumes the entire line as the directive and does not require a semicolon (;) at its end. If you append a semicolon character (;) at the end, it will also be appended in all occurrences of the identifier within the body of the program that the preprocessor replaces.

ALL Credit Goes To C++.com

[Epicly]

Lovely tutorial, but you should also recommend that people can use printf & /n so it would be easier.

[B3cnoc]

wow thats a nice tut bro! . i dont know c++ yet,, i am only reading C# but when i will start on C++ i am sure i will read this Tut 100% !

[TeaBag]

Extremely useful tutorial, definitely goes in-depth. Looks like you spent a lot of time on this share, thanks for it.

[-Infectious]

Extremely useful tutorial, definitely goes in-depth. Looks like you spent a lot of time on this share, thanks for it.

No problem(:

[iCodeDTech™]

Good one, well explained in details for beginners keep it up

[-Infectious]

Good one, well explained in details for beginners keep it up

Thanks man!
I hope you stay on SF! You will love it here(:

[Terridax]

Well, it is a great tutorial, but you leeched it from cplusplus.com, so you need to give them credit.
Proof: link

[-Infectious]

Well, it is a great tutorial, but you leeched it from cplusplus.com, so you need to give them credit.
Proof: link

I did.

[Jacko]

Nice Guide, will help alot of people out Including me.