[TUT] Change Your IP Address In Under 10 Steps! [TUT]

[rated]

This will change your dynamic ip address.

1: Open up the start menu and click on Run

2: Type in command and click ok

* You should see the MSDOS prompt screen *

3: Type ipconfig /release hit enter

4: Type exit now close the window

5: Right click "my network places" and click properties

* You should now see a screen with your Local Area Connection and all your other connections*

6: Right click local area connection and click properties

7: Click on the General tap then click "Internet Protocol (Tcp/Ip)"

8: Click "use the following ip address"

9: Click create an ip address ( just put random letters untill it is full)

9.1: Press tab, and hit "OK" twice

*You should now be back to the Local Area Connection and other connection screen*

9.3: Right click on Local Area Connections and click properites

9.5: Go to "Tcp/Ip" setting

9.7: Click "Obtain and Ip Address Automatically"

9.9: Hit "Ok", Hit "OK" again

Now you have changed your Ip Address in UNDER 10 steps!

To check your new ip, go to one of the following links

http://ipchicken.com
http://whatismyip.com
http://whatismyipaddress.com

+rep if you like it!