How To Upgrade Ubuntu 10.04 [Lucid Lynx] To 10.10 [Maverick Meerkat] - Printable Version +- Support Forums (https://www.supportforums.net) +-- Forum: Categories (https://www.supportforums.net/forumdisplay.php?fid=87) +--- Forum: Computer Support Topics (https://www.supportforums.net/forumdisplay.php?fid=4) +---- Forum: Linux, FreeBSD, and Unix (https://www.supportforums.net/forumdisplay.php?fid=17) +----- Forum: Ubuntu Support (https://www.supportforums.net/forumdisplay.php?fid=61) +----- Thread: How To Upgrade Ubuntu 10.04 [Lucid Lynx] To 10.10 [Maverick Meerkat] (/showthread.php?tid=12719) |
How To Upgrade Ubuntu 10.04 [Lucid Lynx] To 10.10 [Maverick Meerkat] - cheeseburger - 10-12-2010 Start the Update Manager (System > Administration > Update Manager): In the Update Manager, click on the Settings... button (in the lower left corner): The Updates tab in the Software Sources window should open. Select Normal releases in the Show new distribution releases: drop-down menu and click on Close: Back in the Update Manager, click on the Check button to check for new updates and distribution releases: The Update Manager should show that a new distribution release (10.10) is available. Click on the Upgrade button to start the distribution upgrade: A window with the release notes for 10.10 comes up. Click on Upgrade again: The upgrade tool is now being downloaded. Afterwards, type in your password. The upgrade is being prepared: Click on Start Upgrade to finally begin with the upgrade process: The upgrade packages are now being downloaded... ... and installed. This can take some time, so please be patient. You might see the following message (Continue without installing GRUB?). I recommend to check the checkbox and click on Forward so that the system will continue to use the old, working GRUB. If you don't check the checkbox , the update manager will install a new GRUB and ask you on which device/partition it should be installed which can make the system unbootable if you select the wrong device/partition. Because we had to change the Release upgrade settings in the Software Sources window, you will see the following message. It is ok to select Keep: At the end of the upgrade process, you should remove obsolete packages: The system needs to be rebooted to complete the upgrade, therefore click on Restart Now: After the reboot, you can use your new Ubuntu 10.10 desktop: Source RE: How To Upgrade Ubuntu 10.04 [Lucid Lynx] To 10.10 [Maverick Meerkat] - phire nuk3r - 10-12-2010 Very nice and detailed tutorial here mate. Great job, keep up the good work. RE: How To Upgrade Ubuntu 10.04 [Lucid Lynx] To 10.10 [Maverick Meerkat] - cheeseburger - 10-13-2010 (10-12-2010, 11:01 PM)phire nuk3r Wrote: Very nice and detailed tutorial here mate. Cheers, i copied it over form the source at the bottom of the op. I just upgraded from 10.04 to 10.10 using this method, it has worked for me. RE: How To Upgrade Ubuntu 10.04 [Lucid Lynx] To 10.10 [Maverick Meerkat] - Spagnum - 10-26-2010 Worked like a charm, thanks! RE: How To Upgrade Ubuntu 10.04 [Lucid Lynx] To 10.10 [Maverick Meerkat] - PSYCHO DEADMAN - 10-26-2010 thankz for this i needed this RE: How To Upgrade Ubuntu 10.04 [Lucid Lynx] To 10.10 [Maverick Meerkat] - Diabolic - 10-26-2010 Thanks a lot for the help on this RE: How To Upgrade Ubuntu 10.04 [Lucid Lynx] To 10.10 [Maverick Meerkat] - raamee - 10-27-2010 Good tutorial. Nicely guided through images. RE: How To Upgrade Ubuntu 10.04 [Lucid Lynx] To 10.10 [Maverick Meerkat] - haphazard - 10-27-2010 Ubuntu 10.10 is God The themes, wallpaper and speed... the .deb installer integrated into the software center? GENIUS! RE: How To Upgrade Ubuntu 10.04 [Lucid Lynx] To 10.10 [Maverick Meerkat] - Telhast - 10-30-2010 Ubuntu 10.10 is awesome , and your TUT is too . Fully detailed step by step with pictures . Really good TUT . |